The Samsung Galaxy Note 3, was launched featuring a 5.7 inch full HD display with a screen resolution of 1080 x 1920 pixels. The smartphone which comes with a 3200 mAh battery capacity, packs a Exynos 5 Octa Core or Qualcomm’s Snapdragon 800 processor. The device sport’s a 13 MP camera at its rear while a front facing sensor of 2 mega-pixels.
This post will show you, how to install TWRP recovery as well as explained how to flash it in your on Samsung Galaxy Note 3. No need to worry cause recovery works well for Galaxy Note 3 running on all Android versions. This post is for Samsung Galaxy Note 3 mode; SM-N9005, SM-N900A, SM-N900W8, SM-N900T, SM-N900R4, SM-N900P, SM-N900V, SM-N900K, SM-N900L, SM-N900S, SCL22, SC-01F, N900H and other Exynos Variants.
Before you begin,
Make sure you back up all your data
Charge your smartphone up to 65%
Turn off Anti Virus and Firewall to prevent any connection issues.
Enable USB debugging mode on your phone if you face connection issues.
Now Download and Install Samsung USB drivers  HERE.
Download and Extract Odin3 v3.13.1Â HERE
Download the TWRP Recovery for Your Device:
You can download TWRP 3.2.2.0 for N900H and other Exynos Variants  HERE.
The Latest TWRP 3.2.2.0 SM-N9005, SM-N900A, SM-N900W8, SM-N900T, SM-N900R4, SM-N900P, SM-N900V can be found HERE.
SM-N900K, SM-N900L, SM-N900S can be downloaded HERE
And for SCL22, SC-01F, you can download  HERE.
How to Install TWRP Recovery on your Galaxy Note 3
Download the file for your variant.
And then open Odin3.exe.
Put your phone in download mode, to do so, turn it off completely. Now turn it on by pressing and holding Volume Down + Home Button + Power Key, you should see a warning now, press Volume Up to continue.
Connect your phone to your PC.
The ID:COM box in Odin should turn blue now, that means your phone is connected properly in download mode.
Click the PDA tab in Odin and select the downloaded Recovery.tar file and let it load. Your Odin should look exactly as shown below, make sure that no extra options are selected.
Hit start now and sit back, it will take a few seconds to flash the recovery and your device will reboot.
Press and hold Volume Up + Home Button + Power Key to access the TWRP Touch Recovery that you just installed.
You can backup your current ROM and do a lot of other things using the options in TWRP Recovery.
Make sure that you make an EFS backup and save it on your PC as well. Find the option in TWRP Recovery.
And you are done
How to Root:
To root your device, download the SuperSu.zip file from HERE
Now place the downloaded file on your phone’s sd card.
Open TWRP Recovery and select Install >>> SuperSu.zip and flash it.
Reboot your device and find SuperSu in app drawer.
And you are done.
Hope this was helpful, kindly share this post with friends.
No comments:
Post a Comment